Cooling System Guides
How to Identify a Tractor Radiator Before Ordering a Replacement
To identify a tractor radiator, start with the OEM or part number, then compare the old radiator's core shape, tank layout, inlet and outlet positions, mounting points, filler neck, drain position, oil cooler fittings when present and machine details. Send front, rear, side and close-up photos before ordering so the part can be reviewed from visible evidence instead of a model name alone.
A tractor radiator replacement should be matched from the old radiator and the OEM number whenever possible. Many radiators look similar from the front but differ in hose positions, mounting brackets, tank shape, filler neck, drain plug, shroud mounting or oil cooler connections.
This guide is for agricultural parts buyers preparing an inquiry, not for diagnosing overheating. If you already have a part number, use OEM Lookup. For listed cooling-system references, browse Cooling System Parts or review the related Radiator LVA16455 product page.
Where should I look for the radiator OEM number?
Check the top tank, side frame, label area, mounting bracket, old package and invoice. A radiator number may be printed on a sticker, stamped into a frame or molded into a tank. Photograph the whole area and a close-up of the number because some marks are casting or production codes rather than orderable part numbers.
Keep the number exactly as shown, including letters, hyphens and spaces. If only part of the number is readable, send the partial number with machine model, serial number and old radiator photos. Do not rely on tractor model alone when several radiator versions may exist.
What radiator shape details should be compared?
Compare the core outline, tank layout, frame shape and whether the radiator is tall, wide, offset or fitted with side brackets. For inquiry purposes, photos are often more useful than typed dimensions unless the old number is missing.
If measurements are needed, provide overall height and width, core height and width, core thickness only from the old radiator, and a note explaining where each measurement was taken. Do not estimate dimensions from an online product image.
How important are inlet, outlet and filler-neck positions?
Hose connection positions are one of the most common wrong-match risks. Photograph the upper inlet, lower outlet, overflow pipe, filler neck, drain plug and any small auxiliary connections. Note whether each connection points straight, angled, upward, downward or sideways.
The tractor water pump identification guide covers another cooling-system part where hose position matters. The same principle applies here: visible connection layout should be checked before ordering.
What about mounting holes, shroud brackets and oil cooler fittings?
Mounting tabs, bolt holes and fan-shroud brackets can decide whether the radiator installs correctly. Send front and rear photos that show all brackets. If the radiator has oil cooler fittings or transmission cooler fittings, photograph those ports separately and do not assume a radiator without fittings can replace one with fittings.
Some radiators are sold as a bare radiator, while related hardware, cap, hose, shroud or isolators may be separate items. Confirm what is included from product evidence before ordering.
Tractor Radiator Inquiry Checklist
| What to send | Why it helps |
|---|---|
| OEM or part number | Best starting point for tractor radiator replacement review. |
| Front, rear and side photos | Shows tank layout, core shape, brackets and outlet positions. |
| Hose inlet and outlet close-ups | Helps compare connection position and orientation. |
| Mounting and shroud bracket photos | Shows whether the radiator can be compared to the installed layout. |
| Oil cooler or auxiliary fitting photos | Prevents selecting a radiator that lacks required connections. |
| Machine model and serial number | Provides application context when several versions exist. |
What are common ordering mistakes?
- Ordering by tractor model only and ignoring hose outlet position.
- Sending one front photo without showing the rear, side brackets or lower outlet.
- Assuming a radiator cap, hoses, oil cooler fittings or mounting hardware are included.
- Measuring only the full frame and not explaining whether the core was measured.
- Treating visible similarity as confirmed compatibility.
Related ARGODAYA references
For cooling-system references, use Cooling System Parts. Related examples include Radiator LVA16455, RE505980 Water Pump and DZ100555 Thermostat. These products are separate cooling-system references and are not substitutes for each other.
Sourcing inquiry CTA
Send the radiator OEM number, photos of both sides, hose outlet positions, mounting points, oil cooler fittings when present, machine model, serial number when available, quantity and destination country.
Request a radiator reference review
Share the radiator number, old-part photos, hose positions, mounting details and quantity for sourcing review.
Send a cooling-system inquiryQuick Checklist
- OEM or part number
- Front, rear and side photos
- Inlet and outlet positions
- Mounting and shroud bracket photos
- Filler neck and drain position
- Oil cooler fittings when present
- Machine model, serial number, quantity and country
Common Ordering Mistakes
- Ordering by model only
- Missing rear-side photos
- Ignoring oil cooler fittings
- Assuming included hardware
- Guessing dimensions from images
Frequently Asked Questions
How do I identify a tractor radiator?
Start with the OEM or part number, then compare the old radiator's core shape, tanks, hose connections, filler neck, mounting brackets, shroud mounts and machine details.
Can I order a tractor radiator by dimensions only?
Dimensions help when the number is missing, but they should be supported by photos of hose outlets, brackets, filler neck, fittings, machine model and serial number.
Do radiator photos prove compatibility?
No. Photos help compare visible features, but final review should also include OEM number, machine details and any serial or configuration information.
What if my radiator has oil cooler fittings?
Photograph the fittings and mention them in the inquiry. Do not assume a radiator without visible fittings can replace one that has them.
Source Notes
- Official and dealer radiator pages were reviewed for common product-page patterns such as part number, compatible-equipment context, dimensions, hoses and mounting-related components.
- This guide does not publish unsupported radiator dimensions or compatibility claims for ARGODAYA product references.
Send a parts inquiry
Include the OEM number, machine model, serial number, old part photos, quantity, and destination country for application review.