Application guidance
Knowledge Center
Practical guides for identifying agricultural machinery parts, checking OEM references, and preparing accurate RFQs.
Guide categories
Browse by inquiry topic
How to Identify a Tractor Radiator Before Ordering a Replacement
To identify a tractor radiator, start with the OEM or part number, then compare the old radiator's core shape, tank layout, inlet and outlet positions, mounting points, filler neck, drain position, oil cooler fittings when present and machine details. Send front, rear, side and close-up photos before ordering so the part can be reviewed from visible evidence instead of a model name alone.
Engine and Filter GuidesHow to Identify a Tractor Fuel Pump Before Ordering a Replacement
To identify a tractor fuel pump, start with the OEM or part number, then confirm whether the old unit is a lift pump, transfer pump, injection pump or another fuel-system component. Compare the mounting flange, actuating lever or drive area, inlet and outlet positions, fittings, gasket face, engine details and old-pump photos before ordering.
Harvesting Parts GuidesHow to Identify a Combine Header Knife Section Before Ordering a Replacement
To identify a combine header knife section, start with the stamped number, then compare tooth pattern, section length and width, thickness, mounting-hole count and spacing, hole diameter, back shape, serration style, cutting-system type and photos of both sides. Do not treat coarse-tooth, fine-tooth and different hole patterns as interchangeable without evidence.
Hydraulic Parts GuidesHow to Identify a Tractor Hydraulic Control Valve Before Ordering a Replacement
To identify a tractor hydraulic control valve, start with the OEM or part number, then compare the valve type, port count and position, thread style, spool or solenoid arrangement, mounting-hole pattern, connector details and old-part photos. These checks help a supplier review a tractor hydraulic control valve replacement request without treating general identification points as confirmed specifications.
Cooling System GuidesHow to Identify a Tractor Water Pump Before Ordering a Replacement
To identify a tractor water pump, first check the OEM or part number, then compare the old pump housing, mounting-hole pattern, pulley, hub or drive flange, hose outlet positions, gasket surface and machine details. Send clear front, rear and side photos before ordering so the part can be reviewed without guessing from symptoms or appearance alone.
Brake and Steering GuidesHow to Identify Tractor Brake Parts: Brake Disc, Brake Piston, Brake Shoe and Seal Kit
To identify tractor brake parts, first separate the part type: brake disc, brake piston, brake shoe, brake pad, seal or seal kit. Then send the OEM number, photos of both sides, visible shape, measurements from the old part, machine model, serial number when available, quantity and country. Do not infer spline count, material or kit quantity from photos alone.
OEM Number GuidesHow to Identify an Agricultural Machinery Part by OEM Number
Use the stamped, printed, or catalog OEM number as the safest starting point for agricultural replacement part sourcing. Buyers should also send old-part photos, machine model details, serial number when available, quantity, and destination country before requesting a quotation.
Parts IdentificationWhat Photos to Send When a Tractor Part Number Is Missing
Clear photos can prevent wrong replacements when the original part number is missing or unreadable.
Buyer and Sourcing GuidesOEM vs Aftermarket Agricultural Machinery Parts
Understand the difference between genuine OEM parts, OEM-reference replacements, and aftermarket replacements.
Application Reference GuidesWhy the Same Tractor Model May Use Different Parts
Production years, serial ranges, engines, transmissions, and regional versions can change the correct part.
Electrical Parts GuidesHow to Check Tractor Alternator Application Details Before Ordering
Alternator selection depends on more than the headline model name.
OEM Number GuidesOEM Part Number vs Model Number vs Serial Number: What Buyers Should Send
OEM part number, machine model, and serial number answer different questions. Sending all three, plus old-part photos and quantity, makes agricultural replacement part review faster and reduces follow-up questions.
Electrical Parts GuidesHow to Identify a Tractor Alternator Before Ordering a Replacement
Use the OEM number, mounting layout, pulley, connector, and visible label details to prepare an alternator inquiry.
Electrical Parts GuidesHow to Identify a Tractor Starter Motor by Teeth, Voltage and Mounting
Starter motor inquiries should include the OEM number plus pinion teeth, voltage label, rotation clues, and mounting photos when visible.
Hydraulic Parts GuidesHow to Measure an Agricultural Hydraulic Cylinder for Replacement
Hydraulic cylinder review needs the OEM number, end fittings, closed length, stroke, bore clues, rod diameter, and port details.
Clutch and Transmission GuidesHow to Measure a Tractor Clutch Disc Before Ordering
Clutch disc inquiries should include the OEM number, outside diameter, spline count, hub profile, and photos of both faces.
Engine and Filter GuidesHow to Identify an Agricultural Air Filter by Dimensions and End-Cap Design
Air filter inquiries should include the OEM number, shape, length, outside and inside dimensions, end-cap style, and seal photos.
Parts Identification3-Point Linkage Parts Explained: Top Links, Lift Arms and Center Links
Identify linkage parts by OEM number, length, hole size, thread details, and photos of both ends.
Buyer and Sourcing GuidesHow Part Number Supersession and Cross-Reference Numbers Work
Supersession and cross-reference numbers can help sourcing, but they still need application checks before ordering.
Buyer and Sourcing GuidesHow to Source Tractor Parts from China: A B2B Buyer's Checklist
To source tractor parts from China, start with OEM numbers, old-part photos, machine details, quantity, and destination country. Then verify the supplier's product understanding, request evidence for dimensions or materials, and inspect samples or a first order before scaling.
OEM Number GuidesTractor Parts Cross-Reference Guide: OEM, Superseded and Replacement Part Numbers Explained
A tractor parts cross-reference is a starting point for sourcing, not a final suitability decision. Buyers should compare the OEM number, superseded number, replacement reference, machine model, serial range, old-part photos, and catalog evidence before ordering.